27/03/2025 13:45:32 : Created file: C:\Users\promerogomb\Desktop\fluxcontrol\motores\PLACond\MessageLogs\messageLog_8916.txt
27/03/2025 13:45:32 : Improved calculation methods are now available; recommend updating to use the default settings.
Do you wish to update the model settings now?
This can be done at any time from Defaults -> Default Settings -> Restore Compatibility Settings. = Yes
27/03/2025 13:45:32 : Resetting default settings
27/03/2025 13:45:32 : Updated value of Active Housing Axial Length Calc from Original to Improved
27/03/2025 13:45:32 : Updated value of Calculated currents drive circuit type from Original to Improved
27/03/2025 13:45:32 : Updated value of Coupled Spray Cooling Flow Rate Calc from Original to Improved
27/03/2025 13:45:32 : Updated value of DC Current Limit External Line Loss Method from Original to Improved
27/03/2025 13:45:32 : Updated value of Duct Contraction Flow Solver Method from Original to Improved
27/03/2025 13:45:32 : Updated value of Duty Cycle Loss Value Used from Improved to Enhanced
27/03/2025 13:45:32 : Updated value of Duty Cycle Sync Current Limit Method from Original to Improved
27/03/2025 13:45:32 : Updated value of Duty Cycle Vehicle Mass Correction Method from Original to Improved
27/03/2025 13:45:32 : Updated value of Embedded Magnet Pole Radius Method from Original to Improved
27/03/2025 13:45:32 : Updated value of External Power Component Distribution from Original to Improved
27/03/2025 13:45:32 : Updated value of Fluid Nodes External Power Injection from Original to Improved
27/03/2025 13:45:32 : Updated value of Force FFT Scaling Method from Original to Improved
27/03/2025 13:45:32 : Updated value of Housing WJ Fluid Weight and Capacitance Method from Original to Improved
27/03/2025 13:45:32 : Updated value of Hybrid AC Loss High Frequency Scaling Correction Method from Original to Improved
27/03/2025 13:45:32 : Updated value of IM Referred Rotor Parameters Calculation Method from Improved to Enhanced
27/03/2025 13:45:32 : Updated value of IM Stator Leakage Inductance FEA Lookup Method from Original to Improved
27/03/2025 13:45:32 : Updated value of Improved Rotor Lam Axial Resistances Calculation from Original to Improved
27/03/2025 13:45:32 : Updated value of Improved SYNC rotor stress calculation from Original to Improved
27/03/2025 13:45:32 : Updated value of Lab Electrical Custom Losses Method from Original to Improved
27/03/2025 13:45:32 : Updated value of NVH Mechanical Order Method (IM) from Original to Improved
27/03/2025 13:45:32 : Updated value of Radial Housing Rotational HTC Calc from Original to Improved
27/03/2025 13:45:32 : Updated value of Radial Housing Spray Cooling With Sleeve from Original to Improved
27/03/2025 13:45:32 : Updated value of Resistance Across Interior Web Calc from Original to Improved
27/03/2025 13:45:32 : Updated value of Rotor Water Jacket Central Inlet Calculation from Original to Improved
27/03/2025 13:45:32 : Updated value of Rotor Water Jacket Node Connection Method from Original to Improved
27/03/2025 13:45:32 : Updated value of Slot Divider Liner Drawing Method from Original to Improved
27/03/2025 13:45:32 : Updated value of SlotWJDuctkWallFrictionCalc from Original to Enhanced
27/03/2025 13:45:32 : Updated value of SlotWJHeatTransferCalc from Original to Improved
27/03/2025 13:45:32 : Updated value of Spoke Magnet Hoop Stress Method from Original to Improved
27/03/2025 13:45:32 : Updated value of Sync Pole Surface Offset Parenting Ratio Setting from Original to Improved
27/03/2025 13:45:32 : Updated value of TVent Circulating Airgap Flow Path from Original to Improved
27/03/2025 13:45:32 : Updated value of TVent Front and Rear Outlet Flow Path from Original to Improved
27/03/2025 13:45:32 : Updated value of TVent Inlet Expansion CSA Calculation from Original to Improved
27/03/2025 13:45:32 : Updated value of TVent Radial Duct Resistance Calc from Original to Improved
27/03/2025 13:45:32 : Updated value of TVent htc Recalculation from Original to Improved
27/03/2025 13:45:32 : Updated value of Unique region naming from Original to Improved
27/03/2025 13:45:32 : Updated value of Use circles in Maxwell Export polylines from Original to Improved
27/03/2025 13:45:32 : Updated value of Varying Armature Copper Loss Calculation from Original to Improved
27/03/2025 13:45:32 : Updated value of Wheel Inertia Torque Method from Original to Improved
27/03/2025 13:45:32 : Reset completed with 39 settings updated.
27/03/2025 13:45:32 : Loaded file: C:\Users\promerogomb\Desktop\fluxcontrol\motores\PLACond.mot